HaseMed Glove Dispenser

Overview

The HaseMed Glove Dispenser is a wall-mounted holder designed to keep a single box of disposable examination gloves clean, dry and ready at the point of care. Available in brushed stainless steel or clear acrylic, the dispenser accommodates standard-size glove boxes used across medical, laboratory, dental and care environments, freeing up bench space while keeping gloves visible and within arm's reach.

Every unit features two keyhole mounting slots on the back panel for fast, secure installation on walls, cabinet sides or workstation cladding. The open top and front recess allow staff to slide a new box in from above and withdraw gloves one at a time without lifting the box out, supporting the clean technique expected in clinical workflows.

Key benefits

• Two material options: brushed stainless steel for high-traffic clinical areas or clear acrylic for reception, treatment bays and aesthetic settings.
• Hygienic wall mounting: keeps glove boxes off contaminated work surfaces and protects cuffs from splashes, spills and dust.
• Fits standard glove boxes: compatible with common 100-count nitrile, latex and vinyl examination-glove cartons from most manufacturers.
• Tool-free refills: drop the new box in from the top; the front opening stays clear for single-glove withdrawal.
• Dual keyhole mounting: two slots on the back panel allow quick, level installation with standard screws and anchors.
• Durable finishes: stainless steel resists corrosion and routine disinfection; acrylic is shatter-resistant and easy to wipe down.
• Space-saving footprint: vertical profile keeps worktops, trolleys and treatment carts clutter-free.

Clinical context and who it is for

Reliable access to personal protective equipment is a cornerstone of standard precautions in any patient-facing or sample-handling environment. A fixed, wall-mounted glove dispenser reduces the chance of boxes being moved between contaminated and clean zones, helps enforce designated PPE stations, and keeps gloves visible so stock can be replenished before it runs out during a procedure.

The HaseMed Glove Dispenser is suited to:

• Medical and general practices equipping treatment and examination rooms.
• Hospitals, outpatient clinics and day-surgery units fitting out nurses' stations and corridors.
• Dental surgeries and orthodontic practices positioning PPE beside each chair.
• Laboratories and research facilities installing glove stations at benches and fume hoods.
• Care homes, residential facilities and home-care bases organising PPE storage.
• Veterinary clinics, physiotherapy rooms and aesthetic studios maintaining hygienic workflows.
• Tattoo and piercing studios and food-preparation areas where glove hygiene is inspected.

How it works

The dispenser is built around a vertical back panel, two side walls and a base shelf that supports the glove box from below. A cut-out on the front allows the cardboard dispensing flap to remain fully accessible once the box is loaded, so staff can pull out one glove at a time without displacing the carton.

1. Choose a position close to the point of use, clear of splash zones and waste streams.
2. Mark the two keyhole slots using a level, drill and insert suitable wall anchors.
3. Drive in two screws, leaving the heads slightly proud, then hang the dispenser onto the keyholes and tighten.
4. Slide a standard glove box into the open top with the dispensing opening facing forward.
5. When the box is empty, lift it out and drop in a fresh carton - no tools required.

Before ordering, check the outer dimensions of your preferred glove box; the dispenser is sized for common 100-count cartons but very oversized or non-standard packaging may not fit.

Cleaning and maintenance

Wipe internal and external surfaces with a soft cloth and a mild, surface-compatible disinfectant as part of routine room cleaning. Avoid abrasive pads or aggressive solvents on the acrylic variant to preserve its clarity. Inspect the mounting screws periodically and retighten if the dispenser has been bumped or heavily loaded.

Package contents

• 1 x HaseMed Glove Dispenser (stainless steel or clear acrylic, as selected)

Mounting screws and wall anchors are not included, so they can be matched to the substrate on site (plasterboard, tile, concrete or cabinet panel).

FAQ

Which glove boxes does it fit?

The dispenser is designed for standard 100-count examination-glove cartons in nitrile, latex or vinyl from common manufacturers. Please compare the outer box dimensions with the inner opening of the holder before purchase.

Can I mount it on a cabinet side instead of a wall?

Yes. The two rear keyhole slots accept standard screws, so the dispenser can be fixed to walls, cabinet sides, partitions or workstation uprights as long as the surface is load-bearing.

Which material should I choose?

Stainless steel is the more robust option for heavily used clinical and laboratory areas and tolerates frequent disinfection. Acrylic offers a discreet look for reception and treatment rooms and makes it easy to see at a glance when a box needs replacing.

Is it suitable for single-use glove protocols?

Yes. The front cut-out lets staff withdraw one glove at a time directly from the carton's dispensing flap, supporting single-use technique without touching the rest of the contents.